vencotek@vencotek.com

+90 216 392 2 444 pbx

  • Home
  • About Us
  • Our Projects
  • Our Products
    • Fans
    • Water Source Package Heat Pumps
    • Ventilation Cowls
    • Dampers
    • Fire Dampers
    • Flow Control Dampers
    • Non-Return And Pressure Relief Dampers
    • Louvers
    • Silencers
    • Galley Hoods and Canopies
    • Show Galley
    • Galley Diffusers
    • Terminal and Inline Units
    • Fan Coil
    • Blast Valves
    • Diffusers Valves and Grilles
    • Displacement Ventilation
    • Separators & Louvres
    • Cooling Units
  • Our References
  • Contact Us
  • English English
    • Türkçe Türkçe

 

Displacement Ventilation

ZCI  ZEN CIRCLEzen_03

The Zen Circle displacement ventilation supply unit is made of galvanised steel, polyester-epoxy-painted with a white (RAL 9010) colour.

The unit has a robust maintenance free, non-clogging design.

The unit is comprised of a detachable, perforated front panel, removable service plate,
a plastic internal fixed flow equalisation element, and casing.

The unit has a circular duct connection at the top or bottom depending on the location of the unit.

Mounting brackets are included in the delivery, srcews not.

OPTIONS

The unit can be equipped with a duct cover and/or installation base, where required.
The top cover of the unit can be replaced by plastic lipstick, flat, or round cap part with white colour and gloss same as standard metal parts. Additionally, different colours and surface patterns are available on separate request.

The front panel of the unit is available of 1.5mm thick galvanised steel for demanding spaces.
overwiev

OVERVIEW

• Capable of alarge supply airflow range
• Uniform supply air distribution is achieved through small perforations, providing optimal conditions in the immediate proximity of the diffuser.
• Low velocity air is diffused at the floor level, making the unit suitable for positioning in the centre of a space.
• The air flow is patterned for 360 degrees of diffusion, enabling large airflow rates with low residual velocities in the occupied zone.
• The detachable front plate enables cleaning of the unit and ductwork
• Circular duct connection with an integrated rubber gasket on the top/bottom.

PRODUCT MODELS & ACCESSORIES

• Model with lipstick, flat or round cap top cover
• Model with stainless steel (AISI 316) design
• Model with thick front panel (1.5 mm)
• Air flow equalization plate when ducted from bottom
• Duct cover

 


 

ZCO   ZEN CORNERzen_07

The Zen Corner displacement ventilation supply unit is made of galvanised steel, polyester-epoxy-painted with a white (RAL 9010) colour.

The unit has a robust maintenance free, non-clogging design.

The unit is comprised of a detachable, perforated front and inner panel, an internal flow equalization plate, and casing.

The unit has a circular duct connection at the top or bottom, depending on the location of the unit.

Mounting brackets are included in the delivery, srcews not.

OPTIONS

The unit can be equipped with a duct cover and/or installation base, where required.

The front panel of the unit is available of 1.5mm thick galvanised steel for demanding spaces.

OVERVIEW

• Capable of large supply airflow range.
• Uniform supply air distribution is achieved through small perforations, providing optimal conditions in the immediate proximity of the diffuser.
• Low velocity air is supplied horizontally at the floor level.
• Suitable for installation in the corner of a room; the air flow pattern is diffused at an angle of 90 degrees.
• The detachable front plate and metallic internal structure enable cleaning of the unit and ductwork.
• Circular duct connection with an integrated rubber gasket on top/bottom.

PRODUCT MODELS & ACCESSORIES

• Model with stainless steel (AISI 316) design
• Model with thick front panel (1,5 mm)
• Duct cover
• Installation base

 


 

ZRE   ZEN RECTAGULARzen_10

The Zen Rectangular displacement ventilation supply unit is made of galvanised steel, polyester-epoxy-painted with a white (RAL 9010) colour.

The unit has a robust maintenance-free, non-clogging design.

The unit is comprised of a detachable, perforated front panel, an internal flow equalization plate, and casing.

The unit has a circular or rectangular duct connection on at the top, or a circular connection on the left/right side or back depending on where the unit is located.

Mounting brackets are included in the delivery, screws not.

OPTIONS

The unit is equipped with a duct cover and/or installation base, where required.

The front panel of the unit is available of 1.5mm thick galvanised steel for demanding spaces.

OVERVIEW

• Capable of a large supply airflow range
• Uniform supply air distribution is achieved through small perforations, providing optimal conditions in the immediate proximity of the diffuser.
• Low velocity air is supplied horizontally at the floor level or vertically from the ceiling
• The unit can also be installed flush with the wall or ceiling
• The detachable front panel and metallic internal structure enable cleaning of the unit and ductwork
• Circular or rectangular duct connections available, with integrated rubber gasket at the top/bottom, or circular connections on the side or back.

PRODUCT MODELS & ACCESSORIES

• Optional duct connection locations
• Stainless steel (AISI 316) design
• Model with thick front panel (1.5 mm)
• Duct cover
• Installation base
• Installation frame

 


 

ZRW   ZEN RECTAGULAR IN WALLzen2_03

The Zen Rectangular in Wall displacement ventilation supply unit is made of galvanized steel, polyester-epoxy-painted with a standard white (RAL 9010) colour. The unit has a robust, maintenance free, non-clogging design.

The unit is comprised of a detachable perforated front panel, a flow equalization plate, and casing.

The unit has a rectangular duct connection at the top or bottom depending on where the unit is located.

OVERVIEW

• Capable of a large supply airflow range
• Uniform supply air distribution is achieved through small perforations, providing optimal conditions in the immediate proximity of the diffuser.
• Low velocity air is supplied horizontally at the floor level
• Suitable for integrated installation into a wall structure.
• The detachable front plate and metallic internal structure enable cleaning of the unit and ductwork
• Rectangular duct connection at top/bottom of the unit.

 


 

ZSC   ZEN SEMI CIRCLEzen2_07

The Zen Semi Circle displacement ventilation supply unit is made of galvanized steel, polyester-epoxy-painted with a white (RAL 9010) colour.

The unit has a robust maintenance-free, non-clogging structure.

The unit is comprised of a detachable, perforated front and inner panel, an internal flow equalization plate, and casing.

The unit has a circular duct connection at the top or bottom, depending the location of the unit.

Mounting brackets are included in the delivery, screws not.

OPTIONS

The unit can be equipped with a duct cover and/or installation base where required.

The front panel of the unit is available of 1.5mm thick galvanised steel for demanding spaces.

OVERVIEW

• Capable of a large supply airflow range
• Uniform supply air distribution is achieved through small perforations, providing optimal conditions in the immediate proximity of the diffuser.
• Low velocity air is supplied horizontally at the floor level
• The air flow is patterned for 180 degrees of diffusion, enabling large airflow rates with low residual velocities in the occupied zone.
• The detachable front panel and metallic internal structure allow cleaning of the unit and ductwork
• Circular duct connection with an integrated rubber gasket at the top/bottom

PRODUCT MODELS & ACCESSORIES

• Model with stainless steel (AISI 316) design
• Model with thick front panel (1.5 mm)
• Duct cover
• Installation base

 

Contact Us

Gemdok Sanayi Sitesi . Güzin Sok. No: 17/14 Aydıntepe Tuzla / Istanbul / Turkey

+90 216 392 24 44

E-mail: vencotek@vencotek.com

Categories

  • Fans
  • Water Source Package Heat Pumps
  • Blast Valves
  • Ventilation Cowls
  • Dampers
  • Flow Control Dampers
  • Fire Dampers
  • Non-Return And Pressure Relief Dampers

Localization

  • English
  • About Us
  • Our Projects
  • Our References
  • Contact Us

ElseDesign © 2015.  All rights reserved.