FANS
CD – Maximum flow rate 17.100 M3/H
– 7 different diameters between Ø315
– Ø630 mm. – Economical choice for for high flow rate, low pressure systems.
– Resistant to corrosion, polyester epoxy coated, pastel beige painted (RAL7032), self-flanged body.
– Attached to aluminum core, reinforced with fiber glass polypropylene wings.
– F class IP 55 aluminum motor with maintenance-free bearing.
– Automatic thermic protection in mono phase models, thermal exit in three phase models.
– Speed control between %0 – %100.
– Installation possibility in every angle.
– Between -20 ˚C and +70 ˚C working temperature in full capacity, -20 ˚C and +50 ˚C in speed controlled.
CP – 
Maximum flow rate 21.600 M3/H
– 8 different diameters between Ø315
– Ø710 mm. – Easy and fast montage directly to the wall.
– Economical choice for for high flow rate, low pressure systems.
– Resistant to corrosion, polyester epoxy coated, pastel beige painted (RAL7032), square framed, wire caged motor.
– Attached to aluminum core, reinforced with fiber glass polypropylene wings.
– F class IP 55 aluminum motor with maintenance-free bearing.
– Automatic thermic protection in mono phase models, thermal exit in three phase models.
– Speed control between %0 – %100.
– Between -20 ˚C and +70 ˚C working temperature in full capacity, -20 ˚C and +50 ˚C in speed controlled.
BIF – Maximum flow rate 72.000 M3/H
– 10 different diameters between Ø315
– Ø1250 mm. – 000 m³/h maximum air flow
– Aerofil shaped cast aluminium wings – Circular and conical shape
– IP 55 aluminum motor with maintenance-free bearing.
– Safety usage in kitchen hoods and greasy dusty air
– Small space requires vertical and horizontal setup
– 200°C continuous working temperature
IC – Maximum flow rate 500.000 M3/H
– 15 different diameters between Ø315 – Ø2000.
– Low space required construction and easy montage between two ducts.
– BS729 hot dip galvanized body, self-flanged.
– Fast and easy montage, saves space and labor cost.
– Radial, inclined wings to provide high pressure and efficiency.
– Works in humid environment, IP 44 protect class (Electric connection box IP 54).
– Automatic, thermic protection, outboard, maintenance free bearing, single phase motor.
– Speed control between %0 – %100 .
IN Panel Type Axial
Maximum flow rate 340 M3/H
– IN-A models comes with automatic shutter while IN models not.
– Can be installed wall, ceiling or windows.
– Signal lights to show device is working.
– Optional time control, humidity control and motion sensor
– IP 44 protection motor. ABS plastic body
– Lowest noise in its class
Ventilor Windows Type
Maximum flow rate 750 M3/H
– Axial fan with double way working
– Direct montage to glass or wall
– IP 44 protection motor.
– ABS plastic body.
TB – Duct Support Fans
Maximum flow rate 250 M3/H
– Could be usable either main fan in systems with very low pressure lost or supply fan in regular systems
– Thermoplastic fan body and polypropylene fan blades
– Impedance motor protection in TB 10 and TB 12, Thermic motor protection in TB 15
– Mono phase IP 44 protection motor.
Intra Ceiling Centrifuge
Maximum flow rate 270 M3/H
– Plenum box, radial wing fan
– Minimum noise because of polystyrene isolation
– Washable filter
– Trap door for cancelling reverse flow
– Maintenance-free bearing motor
– Easy and fast montage
– Removable parts for maintenance and cleaning
Compact Panel Type Centrifuge
Maximum flow rate 250 M3/H
– Centrifugial fan with duct connection
– Can be installed wall, ceiling or windows
– Optional time control, humidity control and motion sensor
– Trap door for cancelling reverse flow
– IP 44 protection motor
– Cleanable filter
Smart Window Type
Maximum flow rate 1350 M3/H
– Signal lights to show device is working
– Optional time control, humidity control and motion sensor
– Ventilor models have visible shutters while Smart models haven’t
– Quiet working and long life
TKS – Maximum flow rate 1.113 M3/H
– Ovendried galvanized sheet for high resistant to corrosion
– Hinged design provides easy maintence and cleaning
– IP 55 aluminum external built motor with maintenance-free bearing.
– Autpomatic thermic protection
– Speed control options
TURBO – Maximum flow rate 1.200 M3/H 
– Safety usage in smoke holes, ovens
– Constant working tempreture up to 200 °C
– Ideal solution for smoke holes with low suction
– Cooling fan with IP 54 F class motor
– Aluminum cage and water resistant design provides suitable usage for outsides
– Comes with standart speed control
TKK – Maximum flow rate 2.560 M3/H
– Maximum Flow 2.560
– Ovendried galvanized sheet for high resistant to corrosion
– Hinged design provides easy maintence and cleaning
– IP 55 aluminum external built motor with maintenance-free bearing.
– Autpomatic thermic protection
– Speed control options
DRV – Maximum flow rate 32.000 M3/H
– Vertical flow, aluminum body
– Epoxy coated wide apart fan blades
– Galvanized sheet base
– IP 55 aluminum motor with maintenance-free bearing
– Speed control between %0 – %100 in specified models
– Automatic thermic protection in mono phase models, thermal exit in three phase models
– Double or triple speed options
DRH – Maximum flow rate 35.000 M3/H
– Horizontal flow, aluminum body
– Epoxy coated wide apart fan blades
– Aluminum shutter for water flow
– Galvanized sheet base
– IP 55 aluminum motor with maintenance-free bearing
– Speed control between %0 – %100 in specified models
– Automatic thermic protection in mono phase models, thermal exit in three phase models
– Double or triple speed options
DRVFH – Maximum flow rate 47.500 M3/H
– Vertical flow, aluminum body
– Epoxy coated wide apart fan blades
– Galvanized sheet base
– IP 55 protection motor built outside of air flow duct
– Speed control between %0 – %100 in specified models
– Double speed and explosion protected options
– 120°C constant working temperature in DRVF-H models
BVD Roof Type
Maximum flow rate 51.200 M3/H
– Exhoust fire smoke 2 hours in 400 °C or 620°C
– External mounted IP 54 protection motor
– Vertical blowing, deep drawing aluminium body
– Epoxy coated wide apart fan blades
– Galvanized sheet base – Two motor speed options
– IP 56 protection electric box
JETFAN Induction Radial
– These models have high thrust power. 100N thrust power model has 70-80 m effect range so less fan needed in systems
– Radial wide apart fan blades provide less turbulence
– Maximum 334 mm body height makes it suitable for low ceiling floors
– EN 12101-3 standart certificated 1 hour resistant in 300 °C
– Two speed motor options – One speed models can be working in different capacities with frequence driver to provide energy saving
JETFAN Impulse Axial
– Two way and two speed working options
– 315 mm and 400 mm fan diameter
– Directional wings in air outlet
– EN 12101-3 standart certificated 2 hour resistant in 300 °C
– Inlet and outlet must be distanced from beams
Industrial Fans
• Maximum capacity 650.000 m³/h.
• Maximum pressure 25.000 Pa
• Steel sheet blades and body
• Direct coupled or belt and pulley motor
• Suitable for industrial areas
• Continuous working in high temperatures
RFTX – Maximum flow rate 1.370 M3/H
– Galvanised sheet body
– Eexe II T3 protection and temperature class
– Fully ATEX certificate
– Tri-phase IP 55 motor protection class
RKX – Maximum flow rate 4.680 M3/H
– Galvanised steel sheet body
– Exell IIB+H2T3 protection class
– Fully ATEX certificate
– Speed control between %25 – %100 – Three phase IP 44 protection class motor
– Spark preventer copper inlet
– Fast and easy motor and blade cleaning
EBEX – Maximum flow rate 4.500 M3/H
– Oven drying sheet body
– Eexe II T4 protection and temperature class
– Fully ATEX certificate
– Tri-phase IP 55 motor protection class
DRVFEX – Maximum flow rate 31.900 M3/H
– Vertical blowing, deep drawing aluminium body
– Epoxy coated wide apart fan blades
– Galvanized sheet base
– F class IP 54 protection motor
– Eexe II T3 class explosion protection comes standart
– Fully ATEX certificated
– Different explosion protection class is optional
VB – Maximum flow rate 125.500 M3/H
– High endurance modular cell made of aluminum profile
– Electrostatic, dust painted body
– Polyurethane fiberglass stone wool isolation options
– External motor mounted models optional – Different class filter options
RS – Maximum flow rate 850 M3/H
– Direct montage to the walls provide space
– IP 44 thermic protection motor with maintenance-free bearing
– Speed control between %0 – %100
– Acoustic isolated high corrosion resistance body
IPKCAU – Maximum flow rate 927 M3/H
– LPK single inlet and outlet, CAU three inlet one outlet, IFA acoustic body three inlet one outlet fans
– Easy montage and cleaning
– Speed control between %0 – %100. IP 44 thermic protection, outboard, maintenance free bearing, mono phase motor
– Low body heights provide suitable solutions for suspended roof
CK – Maximum flow rate 1.632 M3/H
– 12 models with 6 different diameters between Ø100 – Ø315
– Fast and easy montage, saves space and labor cost
– Reduced turbulance with galvanized special designed body
– Works in humid environment, IP 44 protect class (Electric connection box IP 54)
– Automatic, thermic protection, outboard, maintenance free bearing, single phase motor
– Speed control between %0 – %100 .
KV – Maximum flow rate 1.775 M3/H
– 6 different diameters between Ø100 – Ø315
– Fast and easy montage, saves space and labor cost
– Radial, inclined wings to provide high pressure and efficiency
– Works in humid environment, IP 44 protect class (Electric connection box IP 54)
– Automatic, thermic protection, outboard, maintenance free bearing, single phase motor
– Speed control between %0 – %100 .
RKB – Maximum flow rate 12.455 M3/H
– 14 different model with 8 different cross section between 400×200 – 1000×500 mm apporapirate to international standards
– RK galvanized sheet RKB aluminum sheet
– Reduced turbulance with galvanized special designed body
– High pressure, high efficiency, minimum noise
– Works in humid environment, IP 44 protect class (Electric connection box IP 54)
– Maintenance free bearing, external motor – Speed control between %0 – %100 .
İRE – Maximum flow rate 12.465 M3/H
– 50 mm fiberglass isolation provides minimum noise
– IRE models round connected
– RKBI models rectangular connected
– High pressure, high efficiency, minimum noise
– Easy montage and cleaning – Speed control between %0 – %100
– Thermic protection in mono phase models, thermic protection B class IP 44 maintenance free bearing in three phase models.
VRKE – Maximum flow rate 9.635 M3/H 
– 4 standard model with TSE quality certificate
– Easy montage and maintenance
– Direct coupled high efficiency plug fan
– Optional steel filter with oil prevent
VFP – Maximum flow rate 13.308 M3/H
– 5 standard model with TSE quality certificate
– Easy montage and maintenance – Direct coupled high efficiency plug fan
– Stainless drainage pan
– Optional carbon filter – Optional filter sensor
– Optional fan speed control
Plastic Fans
– Duct type axial, one way centrifugial or roof type – PVC, PE, PP, PPs or PVDF body
– Direct coupled or vee belt drive fan
– Optional exproof fan