Galley Hoods and Canopies
KW3 GALLEY WATER WASH HOOD
KW3 is a galley water wash hood for use in marine & offshore applications. The highly efficient KW3 hood uses Capture JetTM 3 technology, which allows the hood to operate with up to 45% lower exhaust airflow rates traditional hoods.
The KW3 galley hood automatically washes down the grease filters without the need for removal of the filters from the hood.
Washing cycle, operated by a control cabinet (WR or CCW), is fully automatic and programmable for use in different operation conditions.
The washing process can be manually overriden, when required.
• Capture Jet TM 3 technology, reducing the required exhaust airflow rate and improving the capture and containment efficiencies of the hood, while reducing energy use
• The design follows USPHS requirements
• Automatic periodic cleaning of the exhaust plenum and KSA grease filters (and UV tubes when applicable)
• Minimal maintenance requirements, reducing the work load for personnel cleaning the filters
• High level of hygiene facilitated
• Prevention of the build-up of grease deposits, which pose a serious fire hazard
• High-efficiency grease filtration using *UL-classified KSA multi-cyclone filters
• Supplied as standard with lighting, balancing dampers for both supply and exhaust air and T.A.B. TM airflow measurement taps, which allow accurate and effective balancing of airflows, and efficient commisioning
• Stainless steel, welded construction
KFM GALLEY GREASE HOOD
KFM is a galley grease hood for use in marine & offshore applications to remove contaminated air released by cooking equipment with low heat loads.
• The design follows USPHS requirements
• Easily removable filters for cleaning
• High level of hygiene facilitatedPrevention of the build-up of grease deposits, which pose a serious fire hazard
• Capture JetTM technology is available as an option, reducing the required exhaust airflow rate and improving the capture and containment efficiencies of the hood, while reducing energy use
• High-efficiency grease filtration using *UL-classified KSA multi-cyclone filters
• Supplied as standard with lighting, balancing dampers for both supply (if Capture JetTMis included) and exhaust air and T.A.B.™ airflow measurement taps, which allow accurate and effective balancing of airflows, and efficient commissioning
• Stainless steel welded construction
*) Underwriters Laboratories, USA
KVF CAPTURE JET™ HOOD
• HACCP* certified.
• 30 to 40% reduction in exhaust airflow rates thanks to the Capture Jet™ technology.
• High-efficiency KSA multi-cyclone filters (UL, NSF and LPS 1263 classified).
• Prevention of the build-up of grease deposits, which pose a serious hygiene and fire hazard.
• Draught-free integrated supply air system for enhanced smoke capture and comfort.
• Performance tested independently in accordance with the ASTM 1704 standard.
• Exhaust airflow rates based on ASTM performance and a calculation method of the real heat loads.
• Equipped with Accuflow monitoring device, ensuring the canopies are running at designed airflows.
• Effective commissioning due to “ready to install” standard delivery packages.
• Stainless steel construction with seamless design for improved hygiene and fire safety.
KVI CAPTURE JET™ HOOD
• HACCP* certified.
• 30 to 40% reduction in exhaust airflow rates thanks to the Capture Jet™ technology.
• High-efficiency KSA multi-cyclone filters (UL, NSF and LPS 1263 classified).
• Prevention of the build-up of grease deposits, which pose a serious hygiene and fire hazard.
• Performance tested independently in accordance with the ASTM 1704 standard.
• Exhaust airflow rates based on ASTM performance and a calculation method of the real heat loads.
• Equipped with Accuflow monitoring device, ensuring the canopies are running at designed airflows.
• Accurate and effective commissioning due to “ready to install” standard delivery packages.
• Stainless steel construction with seamless design for improved hygiene and fire safety.
KVM STEAM EXTRACTION CANOPY
The Marine KVM canopies that are manufactured according to USPHS requirements are an addition to the Marine galley ventilation offering.
The KVM steam extraction canopies are used to capture and remove steam resulting e.g. of the industrial dishwashers and bain-maries.
The KVM canopies are the choice when grease filtration is not required.
• High-level of hygiene facilitated
• Supplied as standard with lighting
• Stainless steel, welded construction
• The design follows USPHS requirements
KWH GALLEY WATER WASH HOOD
KWH is a galley water wash hood for use in marine & offshore applications.
The highly efficient KWH hood uses Capture Jet™ technology, which allows the hood to operate with up to 30% lower exhaust airflow rates than traditional hoods.
The KWH galley hood automatically washes down the grease filters without the need for removal of the filters from the hood.
The washing cycle, operated by a control cabinet (see separate brochure), is fully automatic and programmable for use in different operating conditions. The washing process can be manually
• The design follows USPHS requirements
• Automatic periodic cleaning of the exhaust plenum and KSA grease filters (and UV tubes when applicable)
• Minimal maintenance requirements, reducing the work load for personnel cleaning the filters
• High level of hygiene facilitated
• Prevention of the build-up of grease deposits, which pose a serious fire hazard
• Capture Jet™ technology, reducing the required exhaust airflow rate and improving the capture and containment efficiencies of the hood, while reducing energy use
• High-efficiency grease filtration using *UL-classified KSA multi-cyclone filters
• Supplied as standard with lighting, balancing dampers for both supply and exhaust air and T.A.B.™ airflow measurement taps, which allow accurate and effective balancing of airflows, and efficient commissioning
• Stainless steel, welded construction
*) Underwater Laboratories, USA
KWT GALLEY WATER WASH HOOD WİTH SUPPLY AIR
KWT is a galley water wash hood for use in marine & offshore applications.
The highly efficient KWT hood uses Capture Jet™ technology, which allows the hood to operate with up to 30% lower exhaust airflow rates than traditional hoods.
The KWT galley hood automatically washes down the grease filters without the need for removal of the filters from the hood.
The washing cycle, operated by a control cabinet (see separate brochure), is fully automatic and programmable for use in different operating conditions. The washing process can be manually overridden, when required.
• The design follows USPHS requirements
• Automatic periodic cleaning of the exhaust plenum and KSA grease filters (and UV tubes when applicable)
• Minimal maintenance requirements, reducing the work load for personnel cleaning the filters
• High level of hygiene facilitated
• Prevention of the build-up of grease deposits, which pose a serious fire hazard
• Halton Capture Jet™ technology, reducing the required exhaust airflow rate and improving the capture and containment efficiencies of the hood, while reducing energy use
• Draught-free air supply directly to the work area from the low-velocity supply unit located on the front panel of the hood
• High-efficiency grease filtration using *UL-classified KSA multi-cyclone filters
• Supplied as standard with lighting, balancing dampers for both supply and exhaust air and T.A.B.™ airflow measurement taps, which allow accurate and effective balancing of airflows, and efficient commissioning
*) Underwriters Laboratories, USA